On back order, these kits should ship Friday 17th May
THIS KIT WILL REMOVE TOUGHENED GLASS CONDENSATION FOG MIST & DAMP FOR GOOD!
This kit does EXACTLY what it says on the box!
Condensation2Clear for 2 Toughened Windows or Patio Doors / French Doors
Today toughened glass condensation can easily be removed from failed double glazing, by a person with very basic DIY skills, using the Condensation2Clear DIY kit! In fact any person that can drill a hole in wood, can repair a sealed unit it really is easy. The repair only takes 20 minutes and is guaranteed for 20 years, although in reality the repair will last the lifetime of the unit. Scientifically the guarantee is guaranteed because after the repair the pressure equalised unit will react differently to its environment and will not become pressurised then open and later condensate.
The repaired unit will have the same thermal value as when it was new, except if it was argon filled, then the thermal value will be slightly lower.
SIMPLE REPAIR OVERVIEW – Toughened / Tempered Glass
- Identify drill points on the sides of Windows or Doors
- Drill 2 holes in each unit as per the instructions
- Insert the bridging tube across the desiccant spacer bar into the unit
- Load pellets down the bridging tube and push them into the window
- Install air tube and vent covers
Use this kit in conjunction with our window flush if you have dirt / debris inside your windows, this will help flush it out.
NOTES:
Toughened glass repair kit will not require you to drill into the glass, you must never attempt to drill toughened glass it will shatter.
Note, for this kit to work on windows, the window must be able to open as you access the air gap from the sides of the doors.. If you cannot drill from the side, then toughened windows cannot be fixed.
To fix toughened glass units you must be able to access the side of the window, so the windows must open, fixed in windows are not able to be fixed with our kits..
CONTENTS OF KIT
- Instruction Booklets
- 1x Safety glove for handling pellets
- 5mm side window drill bit
- Condensation2Clear drying agent (pellets)
- 6 x large white side window vents
- Spacer bar bridge tubes
- 1x adhesive
PLEASE READ!
If your unit has failed for a long time chemicals from the desiccants mix with the condensation and the sun bakes the chemicals into the glass causing a cloudy effect. This is called etching and looks like river inlets inside the unit. Etching is baked into the glass and CANNOT be removed.
PLEASE DO NOT PURCHASE THIS KIT TO REMOVE STAINING OR ETCHING
