Condensation2Clear 4 Window Repair Kit

£29.99

4 in stock

SKU: C2C4U

THIS KIT WILL REMOVE CONDENSATION FOG MIST & DAMP FOR GOOD!

This kit does EXACTLY what it says on the box!

Condensation2Clear for 4 Windows 

Delivery Worldwide (shipped from the UK)

Today condensation can easily be removed from failed double glazing, by a person with very basic DIY skills, using the Condensation2Clear DIY kit! In fact, any person that can drill a hole in wood can repair a sealed unit it really is easy. The repair only takes 20 minutes and is guaranteed for 10 years, although in reality, the repair will last the lifetime of the unit.

Scientifically after the repair the previously pressure equalised unit will have failed and was allowing moisture to be trapped, will react differently to its environment and will no longer trap the moisture, but through the new vent, the window can now breathe which allows any moisture to escape.

If you have one or two units blown, you can be sure to expect that other units will soon follow, especially windows on the same side of the property to the ones that have currently failed, as they would have all been subject to the same heating/cooling process. One kit 12-window kit (£59.99) will repair 12 units, so the repair cost is only £5 per unit. The repaired unit will have the same thermal value as it currently has.

SIMPLE REPAIR OVERVIEW

  1. Install the first template in the lowest bottom corner and the second template in the opposite top corner.
  2. Drill one hole through both templates using the 4mm diamond drill bit whilst spraying with water.
  3. Insert a 4mm dia magnet into the cavity; now use both magnets to break up any mildew.
  4. Insert condensation pellets into the unit. (the pellets will disappear after 1 month)
  5. Install & cement in both holes two 6mm transparent plugs with a 0.5mm pressure release hole.

You will need to supply one electric drill, and some tap water.

 

PLEASE READ!

If your unit has failed for a long time chemicals from the desiccants mix with the condensation and the sun bakes the chemicals into the glass causing a cloudy effect.  This is called letching and looks like river inlets inside the unit.  Letching is baked into the glass and CANNOT be removed.

PLEASE DO NOT PURCHASE THIS KIT TO REMOVE STAINING OR LETCHING

This kit will not fix toughened/tempered or safety glass use our Toughened Glass Repair Kit for these types of windows/doors.

For toughened / tempered glass our kit is here

If you are unsure of your type of glass

If in the UK look for a kite mark in the corners of the glass, any units after 1996 should have this.

If outside UK your window may have a mark if not there are some videos on youtube that show how to test for toughened glass using a laptop computer and polarised sunglasses.

Related products

Select your currency