Condensation2Clear

Don't replace misty / foggy or double glazed sealed units with condensation. Fix them with this simple DIY kit!

Why double glazed sealed units fail

Posted by John Affleck on October 17, 2016 . 0 Comments

WHY SEALED UNITS FAIL?

The purpose of a double glazed sealed unit is to create a thermal barrier between the two panes of glass. A thermal barrier is created by trapping still dry air in the unit, as still dry air is a very poor conductor of heat.

The sealed unit is under pressure and expands and contracts daily when it is heated by the sun and then cools. One day a seal on the unit will open under pressure and reseal when the unit cools. The unit now acts as a pump pumping out dry air and breathing in cool damp air.

Eventually when the desiccants in the spacer bar are saturated you will see condensation in the unit.

THE REPAIR

We solve this problem by drilling two 4mm holes in the glass with our diamond coated drills (supplied) and then you apply our drying pellets through the bottom...

Continue Reading »

DIY HACK: What glazing firms don't want you to know

Posted by John Affleck on September 19, 2016 . 0 Comments

Window Replacement and Glazing Firms continuously state you cannot repair sealed units when they fail with condensation. The key reason is they want to sell you new windows. These units can be repaired, There is a simple process and there is a kit available that provides what you need.

A repair takes 20 minutes to complete and all you need to provide is a standard drill and some tap water. 

Continue Reading »